Sensori Link Ecu – Damn Racers Shop

Sensore valvola a farfalla TPS

DamnRacers — Sat, 04 Jan 2025 20:53:32 +0000

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead.
Wiring instructions are provided in the box.

Features

8 mm D-Shaft Rotary Sensor
Hall Effect non-contact technology
Long life – extremely robust
IP68 protection
32mm PCD mounting
Redundant output

Link Dash MXS Strada 5 pollici

DamnRacers — Sat, 04 Jan 2025 20:07:54 +0000

Display per visualizzazione dati direttamente da centralina motore!

The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+/G4X Wire-In and Plug-in ECU’s. See features tab for more information.

This listing is for the ‘Street edition’, please see the ‘Race edition’ if you are looking for a dash for motorsport purposes.

The Strada dash is also available in 7-inch (MXG) and 10-inch (MXT) versions.

Link CAN Gauge Display

DamnRacers — Sat, 04 Jan 2025 20:04:53 +0000

Display da collegare tramite canbus direttamente a centralina Link ecu per visualizzazione dati

The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be displayed.

The high contrast OLED display is bright for interior use and dims at night. Configure 1, 2, or 4 gauge layouts on up to 10 different pages. Pages can be scrolled through using the easy to access front buttons. Create customizable warning points, such as the coolant temperature being too high, which trigger a special warning screen and bright LED on the face of the gauge.

Easily customize your CAN Gauge to display the data you want to see with the free to download app (compatible with Android 4.4 or later and Apple iOS). The easy-to-use app works with your smartphone or tablet to wirelessly customize your gauge in minutes and is a lot easier than trying to configure your gauge with only buttons on the front!

Adattatore per sensori M10x1 Femmina e 1/8 BSP maschio

DamnRacers — Sat, 04 Jan 2025 20:00:49 +0000

Adattatore in acciaio inox

Da M10 x 1 Femmina a 1/8 BSP Maschio, compatibile con sensori bosch (verificare i filetti)

Link Ecu Sensore combinato pressione e temperatura

DamnRacers — Sat, 04 Jan 2025 19:55:57 +0000

Sensore combinato di temperatura e pressione per benzina o olio, NON usare su circuito acqua

Two sensors in one – Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor.

Suitable for Diesel, gasoline, E85, engine oil, transmission oil
Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid
-40 to 140°C (-40 to 284°F) Temperature sensor for Liquid
45degree cone seat, M10x1 fitting
Includes Bosch Trapez 4-pin mating connector kit

Not suitable for water/coolant.

Sensore di battito Bosch

DamnRacers — Sat, 04 Jan 2025 19:51:03 +0000

Donut style
8mm hole
Includes plug and pin kit

Link ecu coolant temperature sensor filetto M12

DamnRacers — Sat, 04 Jan 2025 19:44:37 +0000

Sensore temperatura acqua link ecu

Includes Plug Kit – 2 way Bosch Style plug, terminals and boot
M12 Thread

Link Ecu Coolant temperature sensor

DamnRacers — Sat, 04 Jan 2025 19:40:40 +0000

Sensore di temperatura acqua

Includes 2-pin Deutsch DTM connector kit
Aluminium and steel weld in mounting bosses available
1/8″ NPT Thread

Link Ecu 3 Bar MAP sensor

DamnRacers — Tue, 19 Nov 2024 23:34:20 +0000

Sensore pressione collettore Link Ecu 3 Bar assoluti (massimo 2 bar in boost)

Link Ecu Can Lambda Can Bus Module

DamnRacers — Tue, 19 Nov 2024 23:30:38 +0000

Canbus Lambda originale Link Ecu, compatibile con tutte le ecu standalone programmabili, comprende controller can bus, sonda Bosch LSU 4.9, boccola da saldare e connettore DTM4